Characteristics of pigments,modification, and their functionalities

Novel treatments of pigments with inorganic materials have tremendous industrial and commercial prospects. Specific treatment of pigment has a marked effect on its behavior during application. The treatment allows a broad modification of the surface characteristics of pigment particles which leads to improved functionalities. Surface modification of pigments is achieved via coating, polymerization with modifying reagent, treatment with derivatives or polymers, which alter either the optical, conductivity or dispersibility during processing and application. These and many other distinguishing factors that affect the characteristics of pigments such as the class, crystal structure, particle morphology, particle size, hiding power, pigment volume concentration, surface character, and surface treatment have been reviewed. Various organic pigments such as those from fungus and bacteria, and the various families of pigment types such as metallic pigment, light interference, and diffractive pigments which presents decorative quality such as leafing, nonleafing, pearlscent, and Fabry‐Perot effects on substrates have also been reviewed in addition to those from inorganic sources with emphasis on the structure and physiochemical modifications using metal and nonmetal Ions.     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

施工现场标准化管理探讨

通过对神华宁煤400万t/a煤化工副产品深加工综合利用项目60万t/a聚丙烯装置施工作业现场的标准化研究,从技术团队的选择、计划进度控制、现场施工管理、文档资料规范等几个方面,探讨施工作业现场标准化作业的方法,为提高施工作业现场管理提供一些有益的建议。     

基于Hadoop的电力运维审计系统的设计

国家电网公司信息化程度越来越高，单机运维审计系统产生的数据量日益增多，对海量数据高效率存储分析性能严重下降，系统稳定性降低。为满足国家电网当前对运维审计系统数据存储分析以及系统稳定性的需求，在Hadoop开源架构的基础上，本文提出基于Hadoop集群的海量数据分布式存储方法和基于Heartbeat的心跳检测技术，实现基于Hadoop的电力运维审计系统。〖JP2〗实验测试结果表明，基于Hadoop的电力运维审计系统相比单机系统可用性提高了8.42%，大大提升了存储分析海量数据的性能，具有系统工作稳定和服务不间断等优势。     

航空装备保障智能化发展认识与探讨

自新一代人工智能技术迅猛发展以来，世界各国在智能领域动作频繁，军事化应用明显有加速之势，给装备保障带来了变革性发展的机遇。紧密围绕作战-装备-技术-保障之间的依托关系，从作战需求、装备特点、装备设计、诊断测试和技术驱动等五个角度梳理了装备保障发展的关键因素，给出了装备保障60余载发展历程的诸多原因和显著成果；通过对未来作战模式和未来作战平台保障需求的前瞻性判断，分析了未来作战需求和装备牵引装备保障转变的典型技术特征；并在装备保障领域人工智能技术的发展和应用现状总结分析的基础上，系统地提出了装备保障智能化发展的建设性意见和建议，为国内装备保障智能化发展探索了一个可能的技术方向。     

A Flexi-PEGDA Upconversion Implant for Wireless Brain Photodynamic Therapy

Near-infrared (NIR) activatable upconversion nanoparticles (UCNPs) enable wireless-based phototherapies by converting deep-tissue-penetrating NIR to visible light. UCNPs are therefore ideal as wireless transducers for photodynamic therapy (PDT) of deep-sited tumors. However, the retention of unsequestered UCNPs in tissue with minimal options for removal limits their clinical translation. To address this shortcoming, biocompatible UCNPs implants are developed to deliver upconversion photonic properties in a flexible, optical guide design. To enhance its translatability, the UCNPs implant is constructed with an FDA-approved poly(ethylene glycol) diacrylate (PEGDA) core clad with fluorinated ethylene propylene (FEP). The emission spectrum of the UCNPs implant can be tuned to overlap with the absorption spectra of the clinically relevant photosensitizer, 5-aminolevulinic acid (5-ALA). The UCNPs implant can wirelessly transmit upconverted visible light till 8 cm in length and in a bendable manner even when implanted underneath the skin or scalp. With this system, it is demonstrated that NIR-based chronic PDT is achievable in an untethered and noninvasive manner in a mouse xenograft glioblastoma multiforme (GBM) model. It is postulated that such encapsulated UCNPs implants represent a translational shift for wireless deep-tissue phototherapy by enabling sequestration of UCNPs without compromising wireless deep-tissue light delivery.     

Fabricating a partial wetting structure for improving the toughness of intumescent flame-retardant HDPE

A multistep processing method was developed to fabricate a partial wetting morphology for improving toughness of flame retardant polymer. In the first step, high-density polyethylene (HDPE) and nylon 6 (PA6) were melt-extruded with intumescent flame retardant (IFR) for fabricating HDPE/PA6/IFR blends with a core–shell structure (core: IFR, shell: PA6). At the second step, maleic anhydride-grafted-linear low-density polyethylene (LLDPE-g-MAH) was melted with HDPE/PA6/IFR at processing temperatures slightly below the melting temperature of PA6 to produce a partial wetting morphology in which LLDPE-g-MAH phase with the sphere was dispersed at the HDPE/PA6 interface. The effect of the LLDPE-g-MAH content on the impact strength was investigated, and high toughness was exhibited in the blend with 2 wt % LLDPE-g-MAH. Its elongation at break and notched impact strength were 43 and 270% higher, respectively, than that of neat HDPE. The unique interface failure mode was responsible for the high impact strength. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48735.     

基于时序数据的云网协同平台人工智能运维体系

云计算在企业应用中的拓展不但表现为平台规模的拓展，也表现为平台应用的延伸。“云网协同”和“微服务化”是当前企业云平台演进的重要趋势。随着企业信息化建设重要性的持续提升，微服务化云网协同平台的运行维护面临极大挑战。首先分析了平台运维面临的挑战，梳理了平台人工智能运维需求，提出了基于时序数据分析的平台人工智能运维技术体系，并给出了云网协同平台人工智能运维子系统参考设计。所提技术体系和系统设计具有实用性和推广性，可以作为企业云平台建设和优化的技术途径参考。     

Influence of operation number on arc erosion behavior of Ag/Ni electrical contact materials

Arc erosion behavior of Ag/Ni materials with different operation numbers was investigated by OM, 3DOP and SEM. The results indicated that the arc erosion of Ag/10Ni electrical contact material fabricated by sintering? extrusion technology was more and more serious with the operation numbers increasing from 1000 to 40000. With the same operation numbers, the arc erosion on anode was more serious than that on cathode. Besides, the pores preferred to emerge around the arc effect spot during the first 10000 operations. And the morphology of the molten silver on cathode and anode was different due to the action of gravity and arc erosion. Furthermore, the relationships among arc energy, arc time, welding force, electric resistivity, temperature and mass change on contacts were discussed, which indicated that the mass loss on cathode was mainly caused by the fracture of molten bridge.     

Constitutive model for gas hydrate-bearing soils considering different types of hydrate morphology and prediction of strength-band

The present study proposes a new elasto-plastic constitutive model that considers different types of hydrates in pore spaces. Many triaxial compression tests on both methane hydrate-bearing soils and carbon dioxide hydrate-bearing soils have been carried out over the last few decades. It has been revealed that methane hydrate-bearing soils and carbon dioxide hydrate-bearing soils have different strength and dilatancy properties even though they have the same hydrate contents. The reason for this might be due to the different types of hydrate morphology. In this study, therefore, the effect of the hydrate morphology on the mechanical response of gas-hydrate-bearing sediments is investigated through a model analysis by taking into account the different hardening rules corresponding to each type of hydrate morphology. In order to evaluate the capability of the proposed model, it is applied to the results of past triaxial compression tests on both methane hydrate-containing and carbon dioxide hydrate-containing sand specimens. The model is found to successfully reproduce the different stress–strain relations and dilatancy behaviors, by only giving consideration to the different morphology distributions and not changing the fitting parameters. The model is then used to predict a possible range in which the maximum deviator stress can move for various hydrate morphology ratios; the range is defined as the strength-band. The predicted curve of the maximum deviator stress obtained by the constitutive model matches the empirical equations obtained from past experiments. It supports the fact that the hydrate morphology ratio changes with the total hydrate saturation. These findings will contribute to a better understanding of the relation between the microscopic structures and macro-mechanical behaviors of gas-hydrate-bearing sediments.